Belts

Now and then your turntable will need a new belt. Sometimes it is easy noticeable when a belt needs to be replaced. With most turntables you will notice that the turntable does not reach speed anymore, can not maintain the right speed or does not switch from one speed to the other.

If you want to stay ahead of these symptons you can check the belt from time to time. If you take the belt of the player completely and stretch it a little you should not see small cracks appearing. Cracks showing means the belt became to dry over time.

Sometimes a belt does become stretched by itself, just because it has been on the player for a to long time. You will not feel tension when you strecth the belt while still on the turntable.

Belts will age, you can not stop this process. High temparutures and moist will influence the belts lifetime.
Just check it now and then, your turntable will reward you!

Please notice you have to stick to the original belt specification and -most important- the same belt shape and dimensions. It is not possible to change from square belt to round or otherwise. The different shape will not work on your pulley (the drive wheel on the motor) and because of the different contact area the speed will be incorrect. When in doubt, just contact us for advice.


Narrow by selecting a Brand:
Thorens Original Thorens Belt for most Thorens Types

THORENS - Original Thorens Belt for most Thorens Types

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for most common Thorens Turntables. TD 150, 125, 126, 127, 226, 146, 147, 160, 165, 166, 105-115, 280mkI,mkII,mkIII, 316-321, 520, 521, Concreto, 2001, 3001, 700, 158, 170, 190, 235, 240, 295mkI to mkIV, 160HD,...

Thorens Thakker belt for most Thorens Types

THORENS - Thakker belt for most Thorens Types

Affordable belt for most Thorens turntables
-- In Stock --

Thakker Replacement drive belt for most common Thorens Turntables. TD 150, 125, 126, 127, 226, 146, 147, 160, 165, 166, 105-115, 280mkI,mkII,mkIII, 316-321, 520, 521, Concreto, 2001, 3001, 700, 158, 170, 190, 235, 240, 295mkI to mkIV, 160HD,...

Thorens Original Thorens Belt for TD124

THORENS - Original Thorens Belt for TD124

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for the Thorens TD124 Turntable.

Thorens Original Thorens Belt for TD280 mkIV

THORENS - Original Thorens Belt for TD280 mkIV

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for the Thorens TD280 mkIV Turntable.

Thorens Original Thorens Belt for Thorens TD180

THORENS - Original Thorens Belt for Thorens TD180

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for the Thorens TD180 Turntable.

Thorens Original Thorens Belt for Prestige

THORENS - Original Thorens Belt for Prestige

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for the Thorens Prestige Turntable.

Thorens Original Thorens Belt for Reference

THORENS - Original Thorens Belt for Reference

The Original Thorens belt is by far the best
-- In Stock --

Original Thorens Replacement drive belt for the Thorens Reference Turntables.

Transrotor Short Drive Belt for Transrotor

TRANSROTOR - Short Drive Belt for Transrotor

180mm diameter round belt, for driving the subplatter
-- In Stock --

Original Transrotor belt. Medium diameter 180mm. Fits most Transrotor models with one motor and driven around the main platter, for example Zet-1 and Zet-3. For Transrotor turntables with optional TMD bearing you need a different (shorter) belt, they...

Transrotor Medium Drive Belt for Transrotor

TRANSROTOR - Medium Drive Belt for Transrotor

300mm diameter round belt
-- In Stock --

Original Transrotor belt. Medium diameter 300mm. Fits most Transrotor models with one motor and driven around the main platter, for example Zet-1 and Zet-3. For Transrotor turntables with optional TMD bearing you need a different (shorter) belt, the...

Transrotor Long Drive Belt for Transrotor

TRANSROTOR - Long Drive Belt for Transrotor

320mm diameter round belt
-- In Stock --

Original Transrotor belt. Long diameter 320mm. Fits most Transrotor models with two or more motors and driven around the main platter, for example Zet-1 and Zet-3.

Transcriptor Servo(!) Belt for Transcriber

TRANSCRIPTOR - Servo(!) Belt for Transcriber

This is a SERVO belt for the Transcriber
-- Sold Out -- But expected in again!

Original belt. Fits model Transcriber only. This is a servo belt, NOT the long belt for driving the platter.

Transcriptor Drive Belt for Skeleton and Saturn

TRANSCRIPTOR - Drive Belt for Skeleton and Saturn

for Skeleton and Saturn models only
-- In Stock --

Original Transcriptor belt. Fits models Skeleton and Saturn only. For other Transcriptor models we also have a belt available, see in the belts section.

Transcriptor Drive Belt for the Round

TRANSCRIPTOR - Drive Belt for the Round

for the Round only
-- In Stock --

Original belt. Fits model the Round only. For other Transcriptor models we also have a belt available, see in the belts section.

Transcriptor Drive Belt for Hydraulic Reference

TRANSCRIPTOR - Drive Belt for Hydraulic Reference

for Hydraulic Reference only
-- In Stock --

Original belt. Fits model Hydraulic Reference only. For other Transcriptor models we also have a belt available, see in the belts section.

Transcriptor Drive Belt for Transcriber

TRANSCRIPTOR - Drive Belt for Transcriber

for Transcriber only
-- In Stock --

Original belt. Fits model Transcriber only. For other Transcriptor models we also have a belt available, see in the belts section. The Servo belt is also available, see under servo belt in the belts section.

Michell Engineering Turntable Drive Belt

MICHELL ENGINEERING - Turntable Drive Belt

for all Michell types except Hydraulic Reference
-- In Stock --

Original belt from Michell. Fits Gyrodec, Gyro SE, Orbe, Orbe SE, Focus, Mycro, Prisma, Tecnodec
for all Michell types except Hydraulic Reference

Clearaudio Universal Silent Belt

CLEARAUDIO - Universal Silent Belt

Original Universal Clearaudio Belt
-- In Stock --

The Silent Belt Universal is the universal drive belt for all Clearaudio turntables, except Emotion. Manufactured without seams or joins from silicone. Thickness 2mm, diameter 304 mm, length 954.56 mm.

Clearaudio Emotion Silent Belt

CLEARAUDIO - Emotion Silent Belt

Original Belt for the Emotion only
-- In Stock --

The Emotion Silent Belt is the drive belt for the Clearaudio Emotion turntable. Manufactured without seams or joins from silicone. Thickness 2mm, diameter 292 mm, length 954.56 mm.

Thorens Belt for TD350,550,800,810,850,2010,2015,2030,2035

THORENS - Belt for TD350,550,800,810,850,2010,2015,2030,2035

An original Thorens belt always performs best
-- In Stock --

Original Thorens Replacement drive Belt for Thorens TD350, TD550, TD800, TD810, TD850, TD2010, TD2015, TD2030, TD2035

Rega Drive Belt

REGA - Drive Belt

Original Rega Belt
-- In Stock --

This is the standard Drive belt for Rega turntables. Be aware of imitations, only the original give optimal results.

Rega Upgrade Drive Belt

REGA - Upgrade Drive Belt

Audible Improvement
-- In Stock --

Suitable for all Rega turntables with the exception of the original (early) Rega Planet turntable.
Manufactured to the tightest tolerance, with Guaranteed precision and improved drive to the turntable motor.

ProJect Drive belt

PROJECT - Drive belt

1x Most used ProJect belt
-- In Stock --

Original ProJect Replacement Drive belt for the following ProJect turntables: Debut - 1 - 1.2 - 2 - 2.9 - 6 - 6.9 - Xpression - RPM4 - RPM5.x - RPM6 and more, see list

ProJect Drive belt for Essential

PROJECT - Drive belt for Essential

Available in Black or White
-- In Stock --

Replacement Drive belt for ProJect Essential (all variants), Round type. Available in white or black. See list for suitable players.

ProJect Drive belt for RPM1 and RPM1.3

PROJECT - Drive belt for RPM1 and RPM1.3

Available in Black or White
-- In Stock --

Replacement Drive belt for ProJect RPM1 (all variants), RPM1.3 (all variants) and Xperience Basic+, Round type. Available in white or black.

Pagina 1 van 2