Audio Technica
AT-520EB Cartridge=Dual Moving Magnet Cartridge

  MM   4.5 mV (at 1kHz, 5cm/sec)   Elliptical nude round-shank stylus   6.4 g (0.2 oz)  

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartri

Availability:   In Stock
Delivery time:  
€129,00 Incl. VAT (BTW)
Quantity:    In Basket

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware.

 

Features:

VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus

Aluminum cantilever

Paratoroidal coils improve generating efficiency

Center shield plate between the left and right channels reduces crosstalk

Durable low-resonance polymer housing

 

Frequency Response
20-23,000 Hz
Channel Separation
27 dB (1 kHz)
Vertical Tracking Force
1.8-2.2 g (2.0 g standard)
Stylus Construction
Bonded round shank
Recommended Load Impedance
47,000 ohms
Output
4.5 mV (at 1 kHz, 5 cm/sec)
Channel Balance
1.5 dB (1 kHz)
Stylus Shape
0.3 x 0.7 mil elliptical
Cantilever
Aluminum pipe
Mount
Half-inch
Replacement Stylus
VMN20EB

 

Coil Impedance: 2,700 ohms (1 kHz)
DC Resistance: 800 ohms
Load Capacitance: 100-200 pF
Coil Inductance: 460 mH (1 kHz)
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz)
Vertical Tracking Angle:23°

Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D
Weight: 6.4 g (0.2 oz)
Accessories Included: Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts

The VM520EB/H combo kit includes the VM520EB elliptical bonded dual moving magnet cartridge premounted on the AT-HS10BK universal 1/2"-mount headshell.

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Includes mounting hardware.

Cartridge system: MM
Output voltage: 4.5 mV (at 1kHz, 5cm/sec)
Channel balance 1kHz: 1.5 dB (at 1kHz)
Channel separation 1kHz: 27dB (at 1kHz)
Frequency range: 15-25000 Hz
Frequency response: 20-23,000 Hz
Tracking ability: 1.8-2.2 g (2.0 g standard)
Compliance: 35 x 10-6 cm/dyne
Stylus type: Elliptical nude round-shank stylus
Stylus tip radius: 0.3 x 0.7 mil elliptical
Tracking angle: 23° Dimensions: 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D
Internal impedance DC: 800 ohms
Internal inductance: 2,700 ohms (1 kHz)
Recommended load Resistance: 47000 ohm
Recommended load capacitance: 100-200 pF
Cartridge weight: 6.4 g (0.2 oz)
Replacement stylus: VMN20EB
 Add
Use commas to separate tags.

Reviews

No reviews found...