Audio Technica
AT33PTG/II Dual Moving Coil

  MC   0.3mV   Microline on gold plated solid boron   6.9g  

Advanced nude tapered boron and weight reduction. This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibrati...

Availability:   Out of Stock
Delivery time:   2-4 days
€499,00 Incl. VAT (BTW)
Quantity:    In Basket

Advanced nude tapered boron and weight reduction
This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.

High performance and long-life MicroLinear™ stylus
MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.

  • Type: Dual Moving Coil
  • Frequency Response: 15 to 50,000 Hz
  • Channel Separation: 30 dB (1 kHz)
  • Channel Balance: 0.5 dB (1 kHz)
  • Coil Impedance: 10 W (1 kHz)
  • DC Resistance: 10 W
  • Force d’Appui: 1.8 à 2.2 g (standard 2.0 g)
  • Tracking Force: 1.8 to 2.2 g (standard 2.0g)
  • Vertical Tracking Angle: 23 degrees
  • Recommended Load Impedance: Min 100 W
  • Coil Inductance: 22µH (1kHz)
  • Static Compliance: 40 x 10 – 6 cm / dyne
  • Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
  • Output Voltage: 0.3 mV (at 1 kHz, 5 cm/sec)
  • Stylus Shape: MicroLine™
  • Cantilever: Gold-plated solid boron
  • Stylus Construction: Nude square shank
  • Mount: 1/2” centers
  • Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm
  • Weight: 6.9 g
  • Accessories: 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)

 

Cartridge system: MC
Output voltage: 0.3mV
Channel balance 1kHz: 0.5dB
Channel separation 1kHz: 30dB (1kHz)
Frequency range: 15-50.000Hz
Compliance: 10x10-6cm/dyne (100Hz)
Stylus type: Microline on gold plated solid boron
Stylus tip radius: Microline
Tracking force range: 1.8-2.2g
Tracking force recommended: 2.0g
Tracking angle: 23degr
Internal impedance DC: 10ohm
Internal inductance: 22uH
Recommended load Resistance: More than 100 ohm
Cartridge weight: 6.9g
 Add
Use commas to separate tags.

Reviews

No reviews found...