Upgrades

Upgrades .

Narrow by selecting a Brand:
Pebbles The Weight - Level I

PEBBLES - The Weight - Level I

Gives your Rega RB100, RB250 or RB251 a firm upgrade
-- In Stock --

The Pebbles "The Weight - level I" is a simple and clever stub/counterweight modification. The mounting is different from other solutions on the market. The stub is tightened by a special nut which locks the stub firmly against the arm-end. You do ...

ProJect Acryl-It Platter

PROJECT - Acryl-It Platter

for Debut or Xpression (and some MusicHall) turntables
-- In Stock --

Upgrade your Debut or Xpression turntable to „Esprit“-standards.with Acryl it. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.
The change is easily made: just exchang...

€89,00 99,00 eur
In Basket
More Info
to wishlist
ProJect Acryl-It E Platter

PROJECT - Acryl-It E Platter

for Essential II turntables from ProJect
-- In Stock --

Upgrade your Essential II turntable to „Esprit“-standards.with Acryl it E. Acryl it E is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

Clearaudio Turboweight

CLEARAUDIO - Turboweight

improve the performance of Rega tonearms.
-- In Stock --

Clearaudio Turbo Weight (For Rega Tonearms)

A stainless steel concentric counterweight designed to lower the centre of gravity and hence improve the performance of Rega tonearms.

A thumbscrew is fitted for comfortable and easy adjustment

Clearaudio VTA-Lifter

CLEARAUDIO - VTA-Lifter

Vertical Tracking Adjustment
-- Sold Out -- But expected in again!

The Clearaudio VTA-Lifter offers precise, repeatable and easy adjustment of VTA (Vertical Tracking Adjustment) in 1/100 mm steps to ensure the perfect vertical alignment of the stylus in the record groove.

VPI Anti Skating Device for JMW arms

VPI - Anti Skating Device for JMW arms

For VPI JMW memorial tonearms
-- In Stock --

On the Signature version of the VPI JMW-9, 10, or 12, you now have the option of installing this mechanical anti-skate.

Pahmer Enterprises Q Up Tonearm Lift

PAHMER ENTERPRISES - Q Up Tonearm Lift

Easy to Install
-- In Stock --

The Q UP is a high precision device that safely lifts your tonearm at the end of the record. It can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and moderni...

Rega Easy Riser

REGA - Easy Riser

Rega VTA adjustment
-- In Stock --

The Incognito Easy Rider is an elegant solution, infinitely adjustable height,the arm being locked into place by the original fixing nut. Suitable for Rega arms with Thread mount, like RB250, RB300, RB600 and other OEM arms made by Rega.

Incognito Tonearm rewire kit

INCOGNITO - Tonearm rewire kit

Direct from cartridgepins to RCA's
-- In Stock --

The incognito re-wire kit lifts the Rega’s (or other brand) performance to undreamed of levels. It cures the lumpy, tucked under bass, and it cures the splashy treble and mid-prominent balance. But then I always figured that you’d get the hi-fi benef...

Jelco Armlifter

JELCO - Armlifter

As used by many turntable brands
-- In Stock --

Michell Engineering Finger Locking Nut

MICHELL ENGINEERING - Finger Locking Nut

Replaces the standard Rega hex nut
-- In Stock --

A straight replacement for the standard hex nut, which is often times difficult to remove due to non-standard size, the Michell Finger Locking Nut fits Rega’s RB250, RB300 and RB600 tonearms.

Michell Engineering VTA Adjuster

MICHELL ENGINEERING - VTA Adjuster

VTA for rega arms on Mitchell
-- In Stock --

This VTA (Vertical Tracking Angle) Arm Adjuster has been designed for the range of Rega arms (RB-250, RB-300 and RB-600) that use a threaded base. Once installed, the user can adjust the vertical tracking angle in minute increments without losing th...

Michell Engineering VTA Adjuster 3-point for Rega

MICHELL ENGINEERING - VTA Adjuster 3-point for Rega

raises the arm 2 to 6 mm
-- In Stock --

The Rega 3-point fixing VTA (Vertical Tracking Angle) Arm Adjuster has been designed for the range of Rega arms (RB-251 and RB301) that use the recently introduced 3-point fixing. Once installed, the user can adjust the vertical tracking angle in min...

Michell Engineering TecnoWeight

MICHELL ENGINEERING - TecnoWeight

Armweight for Rega
-- In Stock --

This really is a significant upgrade for Rega tonearm owners and their various derivatives with an RB-250,RB-300, RB-600 arm or RB-900. This counterweight is precision engineered as with all Michell products and this is the one that is supplied wi...

SRMTech Motor Bearing Upgrade

SRMTECH - Motor Bearing Upgrade

For Rega and Linn AC Motors
-- In Stock --

This is a very effective motor thrust bearing designed for the Philips / Impex / Premotec motor that powers the superb Rega Planar and Linn Turntables as well as the majority of other audiophile decks on the market We also have a slightly different m...

Rega Upgrade Drive Belt

REGA - Upgrade Drive Belt

Audible Improvement
-- In Stock --

Suitable for all Rega turntables with the exception of the original (early) Rega Planet turntable.
Manufactured to the tightest tolerance, with Guaranteed precision and improved drive to the turntable motor.

Rega 24V Motor Upgrade Kit

REGA - 24V Motor Upgrade Kit

For Rega Players Only
-- In Stock --

This kit includes the low noise, low vibration 24v motor designed and developed for our range of multi award winning 24v turntables. Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24v technol...

Rega RP1 Performance Pack (with upgrade belt/mat/bias2)

REGA - RP1 Performance Pack (with upgrade belt/mat/bias2)

1xUpgrade Pack Only
-- In Stock --

The RP1 Performance Pack for the RP1 turntable includes the Rega Bias2 moving magnet cartridge, upgrade drive belt and a high performance 100% natural wool turntable mat usually supplied with the RP3,RP6 and RP8.