Tools

The MFSL GEO-DISC makes cartridge setup easy! You will never realize the full potential of your cartridge without setting it up properly, but let's face it... mounting and aligning a phono cartridge can be a tedious and time-consuming chore. Not so ...

Effectively absorbs resonance on RB250 / 300 counterweights. Two are supplied in the pack and they simply push fit on, with no gluing needed.

High precision gauge calibrated Available in a basic version V2A stainless steel housing or V2A gold plated...

On this Protractor you can find all three well known, major geometries aka Baerwald, Lofgren and Stevenson. Dr.Feickert has revised their famous „Universal Protractor“. Besides making handling easier it has enhanced functionality as well as accuracy.

The Cartridge Alignment Tool from Pro-Ject is a handy tool that makes cartridge set-up a breeze, allowing you to quickly and properly align your cartridge.
Suitable for tonearms between 8" (203mm) and 12"(305mm) effective length.
Very accurate ...

Simple, Ingenious Clearaudio LP Drill Enlarges Undersized Spindle Holes on LPs Quickly, Effectively, and Cleanly.

Accurate and easy to use turntable speed checker made by Audio-Technica in Japan. To use the Audio-Technica AT6180 Strobe Disc, place it over the spindle of your turntable and turn your turntable on. Then, watch the strobe ring under a normal fluorescent

The tool to tune the optimal and exact speed of your turntable. The Stroboscope's break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridg...

Get the Most Accurate Speed Reading from Your Turntable.Proper turntable alignment is critical to getting th...

The strobe-it has two functions: It allows you to check the correct speed of your turntable and on the back of the strobeit you find a tool to adjust the position of your cartridge in the headshell

The Fozgometer V2 is an Azimuth Range Finder for adjusting cartridges in turntables. It is a small portable battery powered unit that is used in conjunction with a test record. It measures channel separation, channel balance, and signal direction quickl.

Level Gauge to level your turntable or furniture.
Diameter 40mm height 10mm

Ortofon Spirit Level
A simple tool to check the positioning of your turntable A very important tool because the positioning of your turntable must be 100 level before adjusting your cartridge

Tonearm Bearing Adjustment Tool

Precision machined tonearm bearing fine adjustment tool!

Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment, when bearings are misadjusted, because of unassured transport of a tur

The Professional Analogue Toolkit provides everything necessary for perfect turntable, arm and cartridge set-up and alignment.Tools include:

Bottle of Clearaudio Bearing Oil
Weight Watcher Electronic Stylus Force Gauge
Standard Bubble Level
Min...

The Ortofon tracking force gauge is a simple budget tool for turntables that is used to determine the stylus tracking force The tracking force is the downward pressure that is applied by the weight of the tonearm through the cartridge stylus and onto...

Simple to use and incredibly accurate .The newest Digital Stylus Force Gauge on the market is also the most accurate This one gets it all right. it measures at the exact height of a record for better accuracy. Its measurement range is between 0,001 a...

This accessory is designed to evaluate the speed of any turntable. The hand-held strobe unit generates a 100 Hz pulsed light source for use with the supplied 180-line stroboscopic disc.

This cartridge alignment protector allows the proper setting of the cartridge offset and overhang.
An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot. When aligning a cartridge for tangency using the alignment p

Would you want a car without an odometer?
Then you won’t want a turntable without a StylusTimer
Created by syndicated Sound Advice columnist Don Lindich, StylusTimer (US and international patents pending) is a special chronograph designed, programmed an

Audio Technica Cartridge Case - Display and protect your cartridges within the distinctive design of this cartridge case, which allows for the secure storage of up to three cartrdiges together with their respective headshells.
3 sets of cartridges wi

High precision gauge, calibrated. In a basic version,

Clearaudio's Weightwatcher gives you a convenient and highly accurate method for measuring stylus pressure, which is essential to a properly set up and accurately performing turntable. Weightwatcher couldn't be easier to use. Just place it on the platter

Spirit level to precisely set up the record player.

Colour:
transparent

Size approx.:
60 mm