Accessories

CLEARAUDIO - Micro Fibre Stripe Set - AC062/DMPS
1x set AC062/DMPS
-- In Stock --
Clearaudio AC062/DMPS Microfiber Strips for Double Matrix Pro-Sonic LP cleaner
VLS - 8 Cones (with self-adhesive )
8 pcs cones in a box
-- In Stock --
Metal cones for under speakers to lessen the floor vibrations due to the loudspeaker, resulting in a tighter bass and more control. Adjustable in height. Equipped with self-adhesive layer to fix. packed in a box of 8 pieces.
VLS - 8 Onderlegschijfje Zwart (Support Discs- black)
8xblack (with self-adhesive back)
-- In Stock --
8pcs/pack =Protect wood floors, cabinets and shelves from the sharp points of cones and spikes.(with self-adhesive back)
Bescherm houten vloeren, kasten en planken uit de scherpe punten van de kegels en spikes. (Met zelfklevende rug)inhoud: 8 stuks
SRMTECH - Main Bearing Damping Rings
clamp with spirit level
-- In Stock --
The Revolution is a Record / Spindle damping device featuring an integral spirit level. It is manufactured from Acrylic and Sorbothane, and is designed to effectively damp the record and turntable spindle, without disturbing the balance.
SRMTECH - Counterweight Resonance Controller
1x
-- In Stock --
Effectively absorbs resonance on RB250 / 300 counterweights. Two are supplied in the pack and they simply push fit on, with no gluing needed.
SIEVEKING - XLR Female Cap
180grs 1disc 33rpm
-- In Stock --
The Sieveking XLR female Caps are useful for all unused in and outputs of good audio components The Caps are made from Pure Copper for optimal shielding with a Gold Plating Inside you find a Teflon plate which absorbs vibrations
SIEVEKING - XLR Male Cap
180grs 1disc 33rpm
-- In Stock --
The Sieveking XLR male Caps are useful for all unused in and outputs of good audio components The Caps are made from Pure Copper for optimal shielding with a Gold Plating Inside you find a Teflon plate which absorbs vibrations
BLUE HORIZON - Contact Cleaning Fluid
simply clean the contact to enhance your sound
-- In Stock --
Blue Horizon Contact Cleaning Fluid cleans all contaminants between on sockets and connectors used in your audio system
Safe to use on all metal surfaces
Stabilizes similar and dissimilar metals to guarantee best possible contact and signal transfer
Ap
CLEARAUDIO - Micro Fibre Stripe Set =AC062/M
AC062/m
-- Sold Out -- But expected in again!
velvet Stripe for Clearaudio Matrix
PRODJUSER - Spare lightbulb bajonet socket for turntable light
1x
-- In Stock --
12 Volts / 5 watt halogen spare light bulb for all models with bajonet socket
REGA - Wall Bracket
Eliminate vibrations or save space
-- In Stock --
Offering total isolation from the floor and the perfect platform for your Rega turntable. Available in White or Black finish. Allows your turntable to be wall mounted.
CLEARAUDIO - Polishing Paste for Acrylic Scratches Remove
for good contact
-- In Stock --
Clearaudio's highly effective polishing paste easily removes little scratches from acrylic surfaces.
CLEARAUDIO - Level Gauge Steel
gauge steel
-- Sold Out -- But expected in again!
High precision gauge calibrated Available in a basic version V2A stainless steel housing or V2A gold plated...
CLEARAUDIO - Vinyl Harmo-nicer
VINYL harmo -nicer
-- Sold Out -- But expected in again!
A new take on the turntable mat: essentially a vinyl record with one blank side which rests against the platter, while the upper side has a fine textured finish designed to interact with the grooves on a record. The result? The best possible vibratio...
CLEARAUDIO - Perfect Points 4pcs
optimum resonance transfer
-- In Stock --
Milled Isolation Point With Ceramic Bearing.
are a versatile, flexible and highly effective direct coupled support for your hifi components, featuring a ceramic ball fitted into a precision milled housing. Perfect Points are M6 threaded
PROJECT - Ground-it deluxe 2
-- In Stock --
Weighing in at nearly 12 kilograms the ProJect Ground It Deluxe 1 sets a new standard in massloaded turntable isolation platforms Finished in a highgrade piano gray lacquer. The Ground It Deluxe comes complete with height adjustable machined cone fe....
PROJECT - Ground-it deluxe 1
ground-it deluxe 1
-- Sold Out -- But expected in again! 1 review
Weighing in at nearly 12 kilograms the ProJect Ground It Deluxe 1 sets a new standard in massloaded turntable isolation platforms Finished in a highgrade piano gray lacquer. The Ground It Deluxe comes complete with height adjustable machined cone fe....
PROJECT - Wallmount-it 1
Decouple you record Player from the floor
-- Sold Out -- But expected in again!
This wall bracket for record players let you decouple your player from the ground. Welded steel frame construction in Matt black finish. Veneered wooden board in black finish. Four heightadjustable spikes to level the board. Surface area W x D 460 x ...
PROJECT - Wallmount-it 3
180grs 1disc 33rpm
-- In Stock --
Screwed steel construction Matt black finish. Lacquered MDF board Matt black. Three heightadjustable spikes to level the board. Surface area W x D 520 x 450mm. Overall dimensions W x H x D 635 x 290 x 455mm
VAN DEN HUL - The Headshell link
high quality four lead wire set for the cartridge-to-headshell connection.
-- Sold Out -- But expected in again!
The HEADSHELL LINK SET is a high quality four lead wire set for the cartridge-to-headshell connection
VAN DEN HUL - Tonearm Cable MCS-150M
Pure Silver
-- In Stock --
Tonearm Cable MC150M Halogen free. All of our cables are designed for an optimal experience of sound. Our different technologies are focused on designing and producing conductors reproduce musical signals very close to natural and live-sound quality....
AUDIO TECHNICA - AT 6101 Headshell Leads
Cartridge to headshell PCOCC lead wires
-- In Stock --
Headshell leads set from Quattro Hybrid Lead Wire with gilded connection contacts.
The Headshell leads set consists of 4 cables (white, green, blue, red).
Length: 4 x 35 mm
REGA - Spacer for three-point Rega arms
Stainless Steel 2mm spacer
-- In Stock --
Stainless Steel 2mm spacer for Rega 3 point tonearms. When Rega arms are fitted to turntables from other manufacturers or a higher cartridge is fitted it may be necessary to add our "arm height spacer" to achieve the correct arm height...
ORTOFON - Headshell Leads
Copper
-- In Stock --
Copper Headshell leads from Ortofon with tinned copper connectors.