Audio Technica
VM750SH Cartridge= Dual Moving Magnet Stereo Cartridge=

  MM   4.0mV (1kHz, 5cm/sec.)   Shibata (Nude Square Shank)   8.0g  

The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanc

Availability:   In Stock
Delivery time:  
€419,00 Incl. VAT (BTW)
Quantity:    In Basket

 

  • The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.

FEATURES:

    • VM dual magnet cartridge with Shibata stylus

 

    • Aluminum tapered cantilever

 

    • Paratoroidal coils improve generating efficiency

 

    • Center shield plate between the left and right channels reduces crosstalk

 

  • Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield

 

SPECS:

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 27,000Hz
Channel Separation 30dB (1kHz)
Output Channel Balance 1.0dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Shibata
Stylus Size 0.26 x 2.7 mil
Stylus Construction Nude Square Shank
Cantilever Aluminium Tapered Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 40 x 10-6 cm/dyne
Dynamic Compliance 10 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 8.0g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN50SH
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1

Cartridge system: MM
Output voltage: 4.0mV (1kHz, 5cm/sec.)
Channel balance 1kHz: 1.0dB (1kHz)
Channel separation 1kHz: 30dB (1kHz)
Frequency response: 20 - 27,000Hz
Compliance: dynamic 10 x 10-6 cm/dyne (100Hz); static40 x 10-6 cm/dyne
Stylus type: Shibata (Nude Square Shank)
Stylus tip radius: 0.26 x 2.7 mil
Tracking force range: 1.8 – 2.2g (2.0g standard)
Tracking force recommended: 2.0 grs (20mN)
Tracking angle: 23˚ degr
Internal impedance DC: 800 ohms
Internal inductance: 460 mH (1 kHz)
Recommended load Resistance: 47,000Ω ohm
Recommended load capacitance: 100 – 200pF
Cartridge weight: 8.0g
Replacement stylus: VMN50SH
 Add
Use commas to separate tags.

Reviews

No reviews found...