Pro-Ject

1) AC / 16V-500mA: Replacement power supply for most Pro-Ject turntables (including all Debut, RPM and X models)
2) DC / 18V-500mA : Replacement Power Supply for Phono Box, Speed Box, Head Box :

Original ProJect Replacement Drive belt for the following ProJect turntables:All Debut turntables (except Debut S/E3)
0.5, 1.2, 1.2E, 1.2 Comfort, & 2
Xpression I, II & III
Xpression II Comfort, Xpression III Comfort & Xpression Carbon/UKX
2.9 Classic

Counterweight for the Project Debut, Debut Carbon, Debut Carbon DC, Debut Carbon DC Esprit, including the USB and SB models.
Depending on your cartridge you can select the right counterweight, there are four different weights available.
Debut Carbon mod

This hinge set allows for the easy detachment of the turntable's supplied lid, and allows the lid to open/close easily. Please note different Pro-Ject turntables use a different part code hinge, so please select carefully to ensure the correct one i...

Original silicone belt, official replacement belt. For models:
Pro-Ject Essential
Pro-Ject Essential USB
Pro-Ject Essential II
Pro-Ject Essential II USB
Pro-Ject Extension 9 Turntable
All Pro-ject Primary Turntables
All Pro-Ject VT-E (vertical) Tur

Replacement Drive belt for ProJect RPM1 (all variants), RPM1.3 (all variants) and Xperience Basic+, Round type. Available only in black.

Pro-Ject Turntable offical original Drive Belt (for Essential III)

Replacement Drive belt for ProJect Xperience. Available as Round or Square belt type.

There's no need to suffer the indignity of a broken or scuffed up dust cover on your Pro-Ject Debut turntable! Simply replace the dust cover with a new one! Replacing the old cover is very easy, requiring only a pair of hands and the ability to gent...

Alu Upgrade Sub-Platter for Pro-Ject turntables ( Debut, Classic, x1/x2...)
1) Debut:
Pro-Ject Debut Carbon DC
Pro-Ject Debut Carbon Esprit SB DC
Pro-Ject Debut Carbon EVO
Pro-Ject Debut RecordMaster
Pro-Ject Debut RecordMaster

This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor. The Classic incorporates a combination of approved belt drive d...

Replacement Drive belt for ProJect Xtension (all variants), Square type
Xtension (1940675028) type 7

Best buy classic for pure vinyl listening pleasure!
Today, many amplifiers do not have a specific phono cartridge input. Phono Box is an ideal phono preamplifier for these hifi system and accepts both MM and MC cartridges. The analogue output of P.....

The strobe-it has two functions: It allows you to check the correct speed of your turntable and on the back of the strobeit you find a tool to adjust the position of your cartridge in the headshell

The use of a finger lift on Pro-Ject record players allows for greater control over the tonearm, and more accurate alignment when cueing a record.

This replacement finger lift uses the cartridge's mounting screws to fix itself to the top of the tonearm

ProJect Feltmat ( Velt Mat )with diameter around 30cm. Meant for use with most turntables.
Measure your platter before you order. Also available for 28cm ProJect Debut turntable.Not all colors shown in picture are availabe.

Upgrade your Debut or Xpression turntable to „Esprit“-standards.with Acryl it. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.
The change is easily made: just exchang...

Upgrade your Elemental or Essential turntable to „Esprit“-standards with Acryl it E. Acryl it E is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

Easy to use and to handle.

Pro-Ject Lube-it(Silent Groove Oil) It is a high-tech lubricant that ensures your turntable spins at a constant velocity. High-tech lubricant for constant velocity.

Replacement Drive belt for ProJect RPM9 (all variants) and RPM10 (all variants), Square type

Replacement Drive belt for ProJect Perspective, Flat type

Universal dust cover for RPM series and others. Keep your turntable protected and free of dust. The ProJect Cover It is a new turntable system dustcover made of high grade clear Plexiglas While this product can be used by itself ideally it will be us...

The Cartridge Alignment Tool from Pro-Ject is a handy tool that makes cartridge set-up a breeze, allowing you to quickly and properly align your cartridge.
Suitable for tonearms between 8" (203mm) and 12"(305mm) effective length.
Very accurate ...